A QR code on an installation: what it is for, where to stick it and what the person scanning sees

The caretaker of an apartment building calls: the boiler in the boiler room is showing an error code. But there are two of them side by side, and the rating plate is behind the casing. With a QR code on each unit, he reports the breakdown with his mobile phone, and the report arrives on the right installation.

Published by Abdelhay Rahou (opens in a new window)5 November 20269 min read

Where it goes wrong without a code on the unit

The person who notices a breakdown is often not your customer, but a resident, a caretaker or an operator. A lot gets lost between that person and your office:

  • The report takes a detour. The resident calls the property manager, the property manager emails the office, and the office calls back for more details.
  • Nobody knows which unit it is. Two boilers in the same boiler room, three air handling units on the roof, a water softener in every flat in a block.
  • The description is vague. “It’s not working”, with no error code and no photo.
  • The technician searches on site. They link their work to the wrong unit, and after a few years the history of both units is no longer right.

What a QR code on the installation is for

  1. Reporting without an account. The person standing in front of the unit scans the code with their smartphone camera, describes the problem and adds a photo. No app or password is needed.
  2. Identifying the right unit. The code belongs to one installation. So the report arrives on that unit, with the customer and the site.
  3. Finding the unit again. The technician scans the same code and opens the installation’s record, instead of searching for it by name or serial number.

In an emergency, a QR code does not replace the phone. Anyone who smells gas or sees smoke calls the emergency services or your emergency number. If you want that number on the unit, put it on a separate label.

Where and how to stick the QR code

  • On the unit itself. A label on the wall or on the boiler room door stays there when the unit is replaced.
  • On the control side, at eye level. The person reporting sees the code without opening a panel or fetching a ladder.
  • Not on a removable panel. With two identical units, a panel can end up on the wrong unit after maintenance, label and all.
  • Not on a hot or wet surface. Next to a flue or under a condensate drain, a label comes loose or fades. Outdoors and in damp rooms, choose a label that can withstand it.
  • With a name the person reporting will recognise. “Left boiler” and “Right boiler” say more on site than “Condensing boiler” twice.
  • During a visit that is already planned, and scanned straight away. Stick the label on at installation or at the next maintenance visit, scan it and compare the name on the screen with the unit. That way you spot a mix-up before a report comes in on it.

What the person scanning sees, and what they do not

Anyone who enters the plant room can scan the code. A good reporting page:

  • confirms the unit with its name, reference and site;
  • asks for little: what is wrong, how urgent it is, a short description and possibly a photo of the display;
  • keeps the file closed: the history, the contract and your customer’s details stay at the office;
  • gives a reference, which the person reporting can quote if they call later.

Contact details and consent. To call back or send a confirmation, you need a name, an email address or a phone number. Only ask for what you will use for that, say what it is for, and have the person reporting tick a box to give their consent. Have the text of your privacy notice checked by your legal adviser.

How the office handles the reports

  1. One person per day checks the new reports at fixed times, and an urgent report immediately.
  2. Review the urgency. The person reporting chooses it themselves, and “urgent” means something different to a resident than in your contract. How to set priorities and time limits is explained in SLA and response time.
  3. Call back if the description is not enough. A photo of the display often says more than the text.
  4. Close with a reason. You reject a duplicate report or a question that is not a breakdown. That keeps the list short.

Pitfalls in practice

PitfallWhat happensWhat you do
The label fades or tearsThe camera can no longer read the codeCheck the label at every maintenance visit and print it again if needed
The unit is replacedThe new unit has no code, or the old one is still on the wallDeactivate the old code, register the new unit and stick on its own label
The label is on the wrong unitReports end up on the other unitScan after sticking and compare the name
The label is in view of passers-byReports that are not breakdownsStick the label in the plant room

An example: two air handling units and a water softener in a sports hall

An installer maintains two air handling units and a water softener in a municipal sports hall. The municipality is the customer, but the hall attendant is next to the installations every day. Before the annual maintenance, the office gives the units clear names: “Main hall air unit”, “Changing rooms air unit” and “Water softener”. The technician sticks the labels on the control side and scans them one by one.

Two months later, the changing rooms are no longer ventilated. The hall attendant scans the code on the air handling unit, chooses “not working” and “urgent”, takes a photo of the error message and enters his mobile number. At the office, the report is on the changing rooms air unit. The planner calls him back: the main hall itself is still being ventilated. He schedules a technician for the next morning, who opens the air handling unit’s record on site by scanning the same code.

How it works in Digitalnatie Service Suite

Every installation registered at a site can get its own QR code.

  • Creating and printing: in the installation’s file, the QR code block shows the status, the number of scans and the last scan. You create the code and print the label as a PDF, with the installation’s name and reference and an invitation to report a breakdown. From the register, you print up to 60 labels on an A4 sheet.
  • Replacing or deactivating: a new QR code makes all labels already printed for that installation invalid; then stick on the new label. Once a code is deactivated, the public page and the technicians’ scanner refuse it.
  • The public page: no login. It confirms that the installation has been identified, with its name, reference and site, and offers a form: what is wrong, how urgent it is (from normal to critical), a description of the problem (mandatory), and optional photos and contact details. Without the consent box ticked, the report is not sent. The person reporting receives a reference. The page shows nothing else about the installation or the customer.
  • At the office: in the QR reports screen, a report in principle becomes one intervention straight away, linked to the installation. If that is not possible, for example for an installation without a site, it waits among the reports to be handled, and you create the intervention, reject it or mark it as spam.
  • In the [mobile app](/en/mobile-app/): the technician scans the QR code and opens the installation’s record, with the next maintenance and their own previous interventions.
  • In the customer portal: the customer also sees the QR reports among their reports, with the follow-up but without the text or the photos.
  • Who: the administrator and the manager create the codes and handle the reports.

Good to know:

  • A technician can only open installations on which they have or had an intervention, and this needs a connection. In Safari on iPhone, the built-in scanner does not work: the technician then types in the code or uses the camera app.
  • For the settings of the QR reports, such as who receives the intervention and the limits against misuse, ask Digitalnatie.
  • The average response time is not yet calculated.
  • The texts of the label and of the reporting page are available in Dutch, French and English.

More about QR codes and installations. What belongs in the unit’s file is explained in the service history per installation. A customer with an account can also report a problem through their customer portal.

Frequently asked questions

What is a QR code on an installation for?

Whoever scans the code reports a breakdown on that one unit, without an account and with a photo. The office sees straight away which installation it is about, and the technician opens the unit’s record by scanning the same code.

Does the person scanning the QR code need an app or an account?

No. A smartphone camera is enough. The scan opens a simple page with no login, with a short form to describe the problem, choose the urgency and add a photo.

What does someone who scans the QR code see?

In Service Suite, they see the installation’s name, reference and site, and the reporting form. They do not see the history, the contract or the customer’s details: a QR code never gives access to the customer’s file.

Where is the best place to stick the QR code?

On the unit itself, on the control side and at eye level, and not on a removable panel or a hot or wet surface. Scan the label straight after sticking it and check that the name on the screen matches the unit.

What do you do with the QR code when a unit is replaced?

The new unit is a new installation, with its own code and its own label. Deactivate the old unit’s code, so that it no longer opens a report. If only the label is damaged, print the same label again.